Matt / Flat 2 Pack Clear Coat for use on various models requiring a matt protective finish.

Contents :

• 100ml Matt Clear Coat (Medium Solid)  also known as Urethane or Polyurethane (Supplied in Glass Bottle)
• 25ml Hardener  (Supplied in Glass Bottle)
• 60ml Thinners (Supplied in Glass Bottle)

Mixing Ratio : 100 Parts Clear + 25 Parts Hardener + 30 Parts Thinner.
(e.g. 50ml Clear, 12.5ml Clear + 15ml Thinners)
This text is stolen from www.hiroboy.com
Drying Times : Air Drying  at 20oC, Dust Free 30 Mins, Tack Free : 10-12 Hours, Thoroughly Dry : 24 Hours.

This Clear coat is safe over all major brands of Decals
Tamiya, Fujimi, Aoshima, Studio 27, Cartograf, Scale Motorsport etc.
Please remember to apply a few mist coats over the decals before the wet coats

Is it possible to pre-mix your 2 pack clearcoat then keep it in a jar for later use if not all used in one go, or is it a case of just mixing enough to do the job?

No must not do this, once you mix the clear coat and hardener a chemical reaction is started, similar to epoxy glue or epoxy putty. It will hardened within 15/20 mins, if you mixed the lot you would be wasting product and money, so only mix whet you need each time, you will quickly find the amounts you need with a small amount of practice.
We would recommend starting with 10ml/gram or Clearcoat - 5ml/gram Hardener and 3ml of Thinners and see how much coverage you get.

[This stuff is the best!! I have never used as good as this clear coat. You wont use anything else, when you have used this! by Juha Pirilä]

.
We order from Zero Paints around the beginning of each month. IF the color you want is listed as back ordered it will be ordered for the next shipment. We recommend you purchase it (if you can wait) to be sure we get enough of the color your interested in !