VMS - Glue Remover Debonder 30ml
VMS - Glue Remover Debonder 30ml
We've all seen it: White super glue residue on plastic, hard to remove as most debonders will not just remove he glue but also react with plastic ruining the model. Not any more! With VMS GLUE-REMOVE Debonder you can remove any unwanted super glue residue with ease and no damage to the model itself!
​Use: Apply debonder over CA (super glue) residue and allow 5-10 minutes for the reaction to happen. Remove the dissolved residue with a scrubber brush and wipe the area clean with a cloth, cotton bud or paper towel. If there is some residue left apply more debonder and repeat the procedure. When you are done use hair dryer to evaporate the debonder. Finally rinse your model with water and dish washing liquid prior priming and painting.
Combine with: CA glue
Recommended techniques: Brush
Available volumes: 30 ml glass bottle with brush
Références spécifiques
VMS - Pigment No. 10a...
Recommended techniques: dusting, weathering liquid
​Combine with: Alkyd, ENML 2.0 binders
​Available textures: zero
​Available volumes: 45 ml jar
VMS - Pigment No. 06c Red...
Recommended techniques: dusting, capillary action, weathering liquid/paste
​Combine with: Alkyd, ENML 2.0 or Acrylic binders
​Available textures: zero, fine, coarse
​Available volumes: 45 ml jar
VMS - Pigment No. 04b Dull...
Recommended techniques: dusting, capillary action, weathering liquid/paste
​Combine with: Alkyd, ENML 2.0 or Acrylic binders
​Available textures: zero, fine, coarse
​Available volumes: 45 ml jar
VMS - Pigment No. 05b Red...
Recommended techniques: dusting, capillary action, weathering liquid/paste
​Combine with: Alkyd, ENML 2.0 or Acrylic binders
​Available textures: zero, fine, coarse
​Available volumes: 45 ml jar
VMS - Pigment No. 09c Track...
Recommended techniques: dusting, weathering liquid
​Combine with: Alkyd, ENML 2.0 binders
​Available textures: zero
​Available volumes: 45 ml jar
VMS - Pigment No. 02b EU...
Recommended techniques: dusting, capillary action, weathering liquid/paste
​Combine with: Alkyd, ENML 2.0 or Acrylic binders
​Available textures: zero, fine, coarse
​Available volumes: 45 ml jar
VMS - Pigment No. 01a EU...
Recommended techniques: dusting, capillary action, weathering liquid/paste
​Combine with: Alkyd, ENML 2.0 or Acrylic binders
​Available textures: zero, fine, coarse
​Available volumes: 45 ml jar
VMS - ALKYD Binders...
Combine with: Spot-on pigments
​Finish: matt, semi-gloss, high gloss
​Open time: Up to 9h
​Reversibility: Within open time
​Available volumes: 50 ml dropper bottle
VMS - Pigment No. 06c Red...
Recommended techniques: dusting, capillary action, weathering liquid/paste
​Combine with: Alkyd, ENML 2.0 or Acrylic binders
​Available textures: zero, fine, coarse
​Available volumes: 45 ml jar