The ZERO SEALER is a quick drying yellow oxide isolator/sealer. The SEALER is supplied ready for use, therefore no thinners are required. Use Zero Paints Airbrush Cleaner equipment after use for cleaning.

Usage Notes:

Thoroughly clean and de-wax the old paint surface with a spirit wipe or suitable cleaner.
Shake/Stir well before use. Apply only one light, even coat is required, checking first that the air line is free of moisture as usual.
One light even coat of sealer will give a layer of approximately 10-20 microns. A airbrush pressure of 30 psi is required.
It will be totally dry after approximately 1 hour at normal temperatures. Drying time is dependent on paint thickness, humidity and temperature.
The sealer should be overcoated with primer